Diameters: M64 M56 M48 M42 M39 M36, customers’ technical requirements
Length: 1~11.8 meters
Property Class: 8.8 9.8 10.9 12.9
Accessories: Nut, plain washer, dome/spherical nut, dome/spherical washer, coupler
Thread: cut thread, rolled thread
Thread length: Acc. to customers’ technical requirements
Thread tolerance: ISO 965-1, 6g
Rod standard: ISO 898-1, ISO898-2
NDT inspection: 100% megnectic partical test, 100% ultrasonic test
Inspection document: EN 10204 type 3.1, type 3.2
Hydrigen embrittlement eliminating: Vaccum refining process
What is post-tensioning?
Post-tensioning is a method of reinforcing concrete. High-strength steel tendons are positioned in ducts or sleeves before the concrete id placed. Once the concrete has gained strength, tension is then applied, pulling the tendons and anchoring them against the outer edges of the concrete, before service loads are applied.
The PT technique is a form of pre-stressing, which differs slightly from post-tensioning as steel tendons are tensioned before the concrete is placed. The tendons are strentched between strong builheads which withstand external forces and the concrete is poured around them.
USES:
bridges
buildings
tanks
stadium
nuclear containment vessels
gravity bases for oil rigs and wind turbines
art structures
Post time: Nov-11-2020