ANCLAJE DE HILO REFORZADO DEL LADO IZQUIERDO Y DERECHO BOLTBARRA DE ANCLAJE PARA SOPORTE DE TECHO MINERO
Acero trenzado, cuña, placa, tuerca, almohadilla de bola
MECÁNICOPROPIEDADES
Steel Grade | Yield Strength | Tensile Strength | Elongation After Fracture | Elongation under Max Force | Impact Absorb Energy | |
Rel/MPa | Rm/MPa | A/% | Agt/% | kv2/J | ||
NOT LESS THAN | ||||||
Industrial Standard | MG335/MG400 | 335 | 500 | 15 | 40 | |
MG500 | 500 | 700 | 22 | 100 | ||
Our company Standard | 600 | 600 | 750 | 19 | 9 | 90 |
700 | 700 | 850 | 17 | 7.5 | 80 | |
785 | 785 | 930 | 16 | 5.5 | 60 | |
830 | 830 | 1030 | 15 | 4.5 | 50 |
DIMENSIÓN GENERAL
Suface Type | Nominal DiameterDn/mm | Nominal Cross SectionSn/m㎡ | Weight per meterg/m | Top strength levelMPa |
levorrotación, sin nervadura longitudinal | 16 | 201.06 | 1578 | 800 |
levorrotación, sin nervadura longitudinal | 18 | 254.47 | 1998 | 800/1080 |
Levorotación, sin costilla longitudinal | 20 | 314.16 | 2466 | 800 |
Levorotación, sin costilla longitudinal | 22 | 380.13 | 2984 | 800 |
Levorotación, sin costilla longitudinal | 25 | 490.88 | 3853 | 800/1080 |
Levorotación, sin costilla longitudinal | 28 | 615.75 | 4834 | 800 |
Levorotación, sin costilla longitudinal | 32 | 804.25 | 6313 | 800/1080 |
PRODUCTION PROCESS
1. 600MPa ~ 700MPa Materia prima — Tratamiento térmico — Prueba de propiedades mecánicas — Aserrado/Corte — Reducir diámetro — Rosca de tornillo — Prueba — Embalaje — Existencias 2. 335MPa ~ 500MPa Materia prima — Reducir diámetro — Rosca de tornillo — Prueba — Embalaje — Existencias en
APPLICATION
- Minería de carbón
- Minería de roca dura
- Civilconstruction
- General construction
- Geotécnica y Litoral
- Puentes
- Represas
- Infraestructura
- Túneles
Introducción general: Perno de anclaje de alta resistencia Dn16mm Nuestrorock bolt is an advanced rock bolt which can ensure the anchoring effect for complex ground conditions ranging from sand and gravel to inconsistent fill, boulders, rubble and weathered rock, as well as through footings and base slabs. It is particularly applied in the following geological conditions, such as weathered rock, gravel layer, back fill, hard conglomerate, etc. Rock anchor can be integrated with the functions of drilling, grouting and anchoring to provide higher bonding stress than smooth steel pipe depending on continuous wave thread. It is extensive applied in all kinds of constructions, such as railway system, metro project and infrastructure development. And It is widely used in tunneling, mining, slope stabilization and foundation support. Rock bolt including deformed steel bar bolt and round steel bar bolt. What’s more deformed steel bar could including full thread bar anchor rock bolt and it could be divided into left handed thread bolt and right handed thread bolt.